JMICRON JMB360 SATA-II AHCI CONTROLLER DRIVER DETAILS:

Type: Driver
File Name: jmicron_jmb360_14386.zip
File Size: 13.3 MB
Rating:
4.06
84 (4.06)
Downloads: 49
Supported systems: Windows 10, Windows 8.1, Windows 7
Price: Free* (*Free Registration Required)

Download Now
JMICRON JMB360 SATA-II AHCI CONTROLLER DRIVER



This GB version has limited write speeds but the read speeds are notably quicker, larger versions of this drive offer much greater, consistent write speeds. As a boot drive it is fast. Anonymous Hey Andreas, this is Gianluca. That command works!

JMICRON JMB360 SATA-II AHCI CONTROLLER DRIVER WINDOWS

Waiting for DSDT fix. Then i adapted the entry jmicron jmb360 sata-ii ahci controller. After ejecting and turning it off, it also disappears from Harddiskutility. If both drivers are loaded at the same time, those will have precedence. The hang does not occur if the option ROM is skipped by setting 0xdf[6], so I use 0xa1 to be closer to what Linux does, although I conttoller no other differences between jmicron jmb360 sata-ii ahci controller and 0xa1. I've had Vista in it for years, and lately been hoping to grab a copy of Win7 before they all go away, but just a tad worried that it might not 'play well' with my old MOBO. JohanDC said:.

I booted into rEFIt again, and this time, it recognized the external drive. Of course, I could not boot from it, because the WinXP installation is made for different hardware. Copyright JMicron Inc.

Page 4 NDA Required. The following Figure 2 shows an example. Figure 2. The following Figure 3 shows an example. Figure 3. Page 5 NDA Required. Much of these errors seem unrelated to the JMB0 additions though perhaps I've got a misplaced bracket somewhere.

I'm also including the full dsdt. Apart from the warning mentioned above this compiles ok. It would be terrific jmicron jmb360 sata-ii ahci controller you could pinpoint where I'm going wrong. I already have thoughts moving to Hyper-V uhh. Thank you. Sorry, is Intel intel raid IR and not intel raid hr. Tanks, Fabiano. Hi Andreas, great initiative! The following output is from 5.

JMICRON JMB360 SATA-II AHCI CONTROLLER DRIVER FOR WINDOWS

Thanks, Koen. HI Koen, the b was already added in 1.

JMicron JMB AHCI Compatibility The FreeBSD Forums

I added the 1b4b in version 1. Thanks for your support Andreas, Yes, you are right. Thanks to this and a number of your other posts I was able to customize the VMware 5. KR Koen.

  • LKML: Jeff Garzik: [PATCH] ahci: get JMicron JMB working
  • Hardware Compatibility - unRAID
  • CONFIG_SATA_AHCI: AHCI SATA support
  • JMB360 Datasheet (data sheet) PDF
  • JMicron JMB362 AHCI Compatibility

Thanks Andrea for all. Fabio from Italy.

JMicron 362 controller and eSATA Port Multiplier

With the following IDs: Class 1b4b I tried install only just the vib file, and the zip not! It is necessary? I have Esxi 5. Thanks John jmicron jmb360 sata-ii ahci controller Hungary. Thank a lot! I just wanted to take a moment and thank you for the SB support and this wonderful walk-through. Like so many I have a lab at home for tinkering as I'm a hobbyist and you got things going again.

Thanks so much! Hey Andreas! Are you still accepting outputs? Latest: silverhawk34 4 minutes ago./02/ Copyright © JMicron Technology Corp. JMB is designed to provide one-port SATA II connectivity. The JMB supports both Compliant with Serial ATA Jmicron jmb360 sata-ii ahci controller (Advanced Host Controller Interface) Spec. Reversion Copyright © JMicron Technology Corp. All rights JMB supports both AHCI and Legacy IDE controller to increase system feasibility, including Native Pin compatible with JMB (1-port SATA II Host Controller).

Relevant Posts