KONICA 8020 TREIBER

The Konica Minolta comes as a standard copier, but has the ability to add printer, konica 8020, and Internet faxing capabilities.

Konica Minolta Introduces The 8020 And 8031 Color Imaging Systems - Mid-Range Color MFPs

High quality prints are made by the with enhanced x dpi resolution, and at speeds of up to 31 ppm in black and white and 20 ppm in color. There is a standard sheet capacity and maximum paper capacity, with all options konica 8020, of 3,sheets. Check konica 8020 lines A and B for deviation.

If the lines konica 8020 in the D direction, increase the setting. Konica 8020 LPH Unit has been replaced. Check the test pattern for the location, at which white lines or black lines in FD occur.

Fold the test pattern in half with the pattern face on the outside. The chip boundary line on the crease the center of the test pattern corresponds to "30 on the panel. Konica 8020 the number on the panel, to which the location of white lines or black lines in FD checked in step 5 corresponds.

Touch the corresponding number on the panel. Change the setting value using the Key Pad.

KONICA 8020/8031 TONER MAGENTA

Black lines in FD: Decrease the setting value. White lines in FD: Increase the setting value.

When a new LPH Unit has been installed, corrections can be made for up to eight loca- tions. Konica 8020 for up to five locations can be made through factory adjustments.

Press the Start key to let the copier produce a test pattern and konica 8020 for lines. The IU has been replaced. The Image Transfer Belt Unit has been replaced. Touch "Gradation Adjust.

KONICA / TONER MAGENTA /

konica 8020 Place the test pattern produced on the Original Glass. Place ten blank sheets of A3 paper on the test pattern and then lower the Original Cover. Press the Start key to let the copier start scanning the original.

Repeat steps from 2 to 6 twice a total of three cycles. The Adj.

Value and Conv. Check the Conv.

Value according to the following procedure. Max 0 and Highlight 0 It completes the adjustment procedure. Konica 8020 neither Max nor Highlight falls outside the ranges specified above: Perform steps from 2 to 6. Select the color to be adjusted.

Konica Minolta

Enter the new setting from the Key Pad. To increase the maximum amount of toner sticking, increase the setting value. To decrease the maximum amount of toner sticking, decrease the setting value. Touch "END to return to the "lmage Adjust menu screen.Featuring copy and print speeds from 20 to 31 pages per minute (ppm) in color and B&W, the and are the first Konica Minolta color products to offer. Konica 8020 Minolta Toner, Parts, and Supplies. Free Shipping on orders over $